SAPHIR offers a complete range of Front-End Attachments to streamline your equipment and work flow.
Every machine is the product of rigorous, programmed quality controls managed directly by SAPHIR’s engineering team, guaranteeing high product quality, measurable outcomes, and full compliance with all relevant certifications and standards. A wide variety of Front-End Attachments are manufactured for tractors, wheel and telescopic loaders for all types of farm work, land development, harvesting and material handling. All SAPHIR Attachments are refined through design and trial to achieve thier core role in its entirety, and engineered to execute the role tirelessly with built in longevity. Optimise your operation, deliverables; and use of time with SAPHIR equipment.
Download the SAPHIR Product Catalogue for all details on your preferred product options.
Pushing and spreading grass silage.
The SAPHIR GG S green fork is primarily used for pushing and spreading grass silage on the silage heap. The 1,000 mm heavy-duty quality tines from SHW Friedrichstal "Made in Germany" are designed to meet the highest demands. The narrow tine spacing of 200 mm also enables use in chopped grass silage and maize silage. Longer heavy-duty tines with a length of 1,250 mm can also be installed on request.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 258
Heavy duty. Large quantities.
The SAPHIR GG green waste fork is a heavy-duty fork for pushing and spreading green waste. The bolted heavy-duty tines enable the transport of large quantities of silage and green cuttings. The device can be seen through at all times.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 260
Hydraulic tipping function. Large quantities.
The green waste fork with hydraulic tipping function is used to collect and distribute large quantities of silage. The integrated hydraulic tipping function makes it easy to tip the load. The back section closed with expanded metal closed back section prevents green cuttings from entering the pick-up area without restricting the view of the tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 262
Distribute silage across the stack with efficiency and precision.
The SAPHIR silage spreader SiloRaptor is used to distribute silage on the silage heap. The main area of application of the machine is in grass harvesting. The large drum blade with a diameter of 1,230 mm with bolted spreading tools each at a height of 150 mm ensures powerful distribution of the silage. Due to the special arrangement of the spreading tools on the drum, the distribution on the silo is particularly uniform. With the hydraulic swivelling of 20° on both sides, the silage can also be optimally deposited at the edge of the heap. The robust design with its high dead weight also ensures a high level of smooth running of the machine when in use. The original Walterscheid cam clutch installed as standard in front of the transmission also serves as an overload protection for the toughest requirements. In addition, outwardly positioned lubrication points, large Maintenance openings and well thought-out accessories for smooth operation of the machine.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 264
Market leading silage compaction.
The ballasting of the implements can be adjusted depending on use and tractor power. The SiloRex 25H and SiloRex 30H models have hydraulic shifting on both sides. This means you can also work safely on edges and walls.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 266
Push plate for maize and green manure.
The SAPHIR KOMPAKT maize and green manure push plates are characterised by a articularly powerful pushing performance thanks to their large working widths. The three-part hydraulic folding mechanism allows you to work right up to the side of the silo and guarantees safe road transport. In addition, the close attachment of the robust blade body to the carrier vehicle ensures a good overview of the blade and good manoeuvring characteristics.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 252
Push plate for maize and green manure.
The SAPHIR KOMBI maize and green manure push plates are suitable for pulling and pushing. Replaceable, highly wear-resistant scraper blades (500 HB) are mounted on both sides of the sturdy blade body. The side sections can be folded in and out individually at the front and rear. The Particularly stable and robust design of the blade also allows it to be used with system tractors up to approx. 350 hp.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 254
Push plate for maize and green manure.
The SAPHIR KOMBI PLUS maize and green manure push plates are suitable for pulling and pushing. Below the honeycomb-shaped shield body, there are replaceable wear bars (500HB) with a long service life on both sides. wear rails (500HB) with a long service life. The side sections can be folded in and out individually by 170° to the front and rear. The water-fillable construction is designed for maximum loads and is ideally equipped for use on large tractors from 200 HP.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 256
Silage and compost stacking and removal.
The SAPHIR grab bucket GS is a universally applicable grabbing tool for the agricultural sector. The main area of application is the removal of silage from the silage stack. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle version, the hardened sickles ensure that no load is impaled during manure removal or loading of compost etc... The appliances can also be supplied for wall removal as an option. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page148
Silage and compost stacking and removal.
The SAPHIR grab bucket GS is a universally applicable grabbing tool for the agricultural sector. The main area of application is the removal of silage from the silage stack. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle Version, the hardened sickles ensure that no load is impaled during manure removal or Loading of compost, etc. The appliances can also be supplied for wall removal as an option.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 141
Silage and compost stacking and removal.
The SAPHIR grab bucket GS L is a universally applicable grabbing tool for the agricultural sector. The L stands for an increased volume compared to the standard grab bucket. The main area of application for this grab bucket is the removal of silage from the silage stack. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle version, the hardened sickles ensure that no load is impaled during manure removal or loading of compost, etc. A wall removal function is optionally available ex works. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 150
Silage and compost stacking and removal.
The SAPHIR grab bucket XL is a universally applicable grab tool for the agricultural sector. The XL stands for a further increase in volume compared to the L grab bucket. The main area of application for this grab bucket is silage removal from the silage stockpile. The tine version of the upper pliers with forged quality tines ensures a clean cutting edge. In the sickle version, the hardened sickles ensure that no load is impaled during manure removal or loading of compost, etc. A wall removal function is optionally available. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 152
For wheeled loaders. Silage and compost stacking and removal.
The SAPHIR grab bucket GSR is a universally applicable Grabbing tool for the gricultural sector. The R stands for the special use on wheel loaders with operating weights of over 10 tonnes. The construction is designed to meet the highest requirements and offers even larger loading volumes compared to the XL grab bucket. The areas of application are diverse and range from the typical silage removal at the silage stockpile to mucking out stables and loading compost, for example. The carrier vehicle mount is shown as standard using the Variable Lock System and can be changed using the 8 locking pins. All appliances are equipped with an adjustable pressure relief valve ex works. Available with Tines.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 154
For breaking down high silage stacks.
The SAPHIR silage comb SK is the ideal implement for breaking down silage from particularly high silage stacks. The adjustable foregrip ensures particularly adaptable and optimised work. The ability to safely cut silage at a height protects both the user and the machine.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 190
For breaking down high silage stacks.
The SAPHIR silage comb SK Heavy Duty is the ideal implement for breaking down silage from particularly high silage stacks. The adjustable foregrip ensures particularly adaptable and optimised work. The ability to safely cut silage at a height protects both the user and the machine.The SAPHIR extension can be universally combined with our grain push plates and silage combs.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 190
Silage cutting tongs. Suitable for all types of silage.
The SAPHIR SSZ silage cutting tongs are suitable for the removal and transport of all types of silage. The counter blades positioned on the right and left of the back section ensure a clean cut without the risk of material jamming. The innovative re-tensioning device allows the gap between the top clamp and the base unit to be adjusted to minimise material jamming. The back of the silage cutting tongs is closed with an expanded metal mesh. This enables a particularly good view. Another unique selling point of the SAPHIR silage cutting tongs is the double-walled upper tong design. This guarantees an optimum cutting pattern without lateral distortion.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 182
Silage cutting tongs. Suitable for all types of silage.
The SAPHIR SSZ XL silage clamps are suitable for removing and transporting all types of silage. A special feature of the XL series is the very large capacity and the large opening width of the top clamp of approx. 1300 mm.The counter blades on the right and left of the back section ensure a clean cut without the risk of material jamming. The innovative re-tensioning device allows the gap between the top clamp and the base unit to be adjusted, minimising material jamming. The back of the silage cutting tongs is closed with an expanded metal mesh. This enables a particularly good view. Another unique feature of the SAPHIR silage cutting tongs is the double-walled upper tong design. The particularly large over bite (approx. 160 mm) guarantees a clean cut without tearing.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 184
Suitable for all types of silage. No lateral twist design.
The SAPHIR SSE silage cutting buckets are suitable for the removal and transport of all types of silage. The closed bucket floor enables the loading of loose feed components and minimises crumbling losses when removing maize silage. The side counter cuts on the back ensure a clean cut without material jamming. The innovative retensioning device allows the gap between the top clamp and the back section to be optimally adjusted. Another unique selling point is the double-walled design of the upper clamp. This guarantees a uniform cutting pattern without lateral twisting. The counter blades positioned on the right and left of the back section ensure a clean cut without the risk of material jamming.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page188
Push-Off wall increases the discharge height.
The hydraulic push-off wall for the SAPHIR silage clamps enables the silage block to be deposited by simply pushing it out. In addition, the push-off wall can increase the discharge height of the feed mixer wagon. This special equipment is only available as original equipment ex works. An additional double-acting control unit is required (+ 1x dw).
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 186
With DGN hydraulic hold-down device.
The SAPHIR manure fork with DGN hydraulic hold-down device is used to transport loose manure, straw, green waste, shrubs, etc... green material, shrubbery, etc... A particular advantage of the equipment is the very large opening width of 1,080 mm. The hold-down device is opened and closed by two double-acting hydraulic cylinders.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page174
Very large opening width of 1400 mm.
The SAPHIR manure and silage clamp is designed for the removal of grass and maize silage, the removal of manure from stables and the transport of loose manure, straw, green waste and shrubbery. A particular advantage of the appliances is the very large opening width of 1,400 mm. The anti-twist tines in the upper tongs ensure that the goods are picked up without any problems. The side tines guarantee transport with the lowest possible losses.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 176
Very large opening width of 1600 mm.
The SAPHIR manure and silage clamps type DSZ L are designed for the removal of grass and maize silage, for the removal of manure from stables and for the transport of loose manure, straw, green waste and shrubbery. A particular advantage of the appliances is the large capacity and the very large opening width of 1,600 mm. The anti-twist tines in the upper tongs ensure that the goods are picked up without any problems. The side tines guarantee transport with the lowest possible losses.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 178
Very large opening width of 2000 mm.
The SAPHIR DSZ XL manure and silage clamps are designed for the removal of grass and maize silage, the removal of manure from stables and the transport of loose manure, straw, green waste and shrubbery. The decisive advantage of the DSZ XL is the particularly large capacity and the very large opening width of approx. 2,000 mm. The anti-twist heavy-duty tines ensure that the goods are picked up without any problems. The side tines provide the transported goods with additional lateral support to minimise losses.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 180
Sickle top clamp. Hydraulic hold-down device.
The SAPHIR light material bucket with hydraulic hold-down device type LGN is used to transport loose manure, straw, green material, shrubbery, etc. A particular advantage of the devices is the very large opening width of approx. 1200 mm. The hold-down device is opened and closed by two double-acting hydraulic cylinders as standard.
With this appliance, you can choose whether the light material bucket with hold-down device is to be supplied in tine or sickle form. The hold-down device is not suitable for tearing work.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page130
Tine top clamp. Hydraulic hold-down device.
The SAPHIR light material bucket with hydraulic hold-down device type LGN is used to transport loose manure, straw, green material, shrubbery, etc. A particular advantage of the devices is the very large opening width of approx. 1200 mm. The hold-down device is opened and closed by two double-acting hydraulic cylinders as standard.
With this appliance, you can choose whether the light material bucket with hold-down device is to be supplied in tine or sickle form. The hold-down device is not suitable for tearing work.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 130
Tough all rounder. Removable side panels.
The SAPHIR waste disposal bucket is a particularly sturdy bucket with top tongs. The range of applications for this bucket extends from loading brushwood and green waste to building rubble and waste at disposal yards. The hydraulic cylinders positioned on the back of the bucket are optimally protected against external influences and associated damage. The standard removable side panels as standard also enable the safe loading of particularly bulky goods.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 162
Forestry work. Green slash and off cuts.
The SAPHIR brushwood forks RG and RGO are suitable for transporting brushwood and green cuttings in forestry. In addition to simple loading work, the particularly robust design also allows the user to push together or collect brushwood in rough terrain or forests. The bolted tines allow variable adjustment of the number of tines in the device and therefore the distance between the tines can be can be adjusted. The standard equipment includes 3 1,050 mm tubular tines. The SAPHIR brushwood forks are available with or without hydraulic top grapple. In the version with a top grapple (RGO), the brushwood fork has two hydraulic cylinders arranged on the back of the grapple. This protects the cylinders from external influences and the associated damage.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 232
Forestry work. Green slash and off cuts.
The SAPHIR green waste and brushwood tongs are suitable for transporting brushwood and green waste in forestry and
municipal applications. In addition to simple loading work, the particularly robust design also allows the user to push together or collect brushwood in rough terrain or forests. Jamming of branches is minimised by the round shape of the upper pliers.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 234
Loading free-flowing bulk goods.
The particularly large-volume SAPHIR XL light goods bucket is suitable for loading free-flowing bulk goods such as grain, artificial fertiliser, wood chips and other voluminous materials up to max. 950 kg / m³.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 126
For wheeled loaders. Loading free-flowing bulk goods.
The large-volume SAPHIR LGR light goods bucket is suitable for loading free-flowing bulk goods such as grain, artificial fertiliser, wood chips and other voluminous materials up to a maximum of 1,300 kg/m³. Thanks to the particularly stable design of the bucket back and optimum power transmission via the vehicle mount, this bucket model is particularly suitable for use on larger wheel loaders and telehandlers.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 128
Loading heavy goods and for earthworks.
The SAPHIR SG XL heavy-duty bucket is particularly suitable for loading heavy goods and for earthworks. The large-volume bucket body enables maximum impact force. The standard overflow protection on the back of the bucket protects the vehicle console from soiling. The bucket is suitable for bulk weights up to max. 1,300 kg/m³.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 136
Loading heavy goods and for earthworks.
The SAPHIR SGR heavy-duty bucket is particularly suitable for loading heavy goods and for earthworks. The large-volume bucket body enables maximum impact force. The bucket is suitable for bulk weights up to max. 1,800 kg/m³
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 138
Increase dumping height by 1m.
With the SAPHIR HK high-tipping bucket, the dumping height of the carrier vehicle can be increased by approx. 1,000 mm. The tipping angle is approx. 110 degrees. The bucket is suitable for bulk weights up to max. 950 kg/m³
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 140
For wheeled loaders. Increase dumping height by 1m.
The SAPHIR HKR high-tipping bucket increases the dumping height of the wheel loader by approx. 1,000 mm. The tipping angle is approx. 110 degrees. The bucket is suitable for bulk weights up to max. 1,100 kg/m³.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 142
Increased discharge height. Measured discharge. Ideal for confined spaces.
The SAPHIR light goods bucket LGA wall is particularly suitable for metered emptying in confined spaces. The push-off wall allows bulk materials to be pushed out easily and without leaving any residue. In addition, a discharge height gain, for example at the mixing wagon, can be achieved by the discharge wall. The standard flow divider and pressure relief valve ensure that the bulk material is discharged evenly.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 132
Increased discharge height. Measured discharge. Ideal for confined spaces.
The SAPHIR light goods bucket LGA wall is particularly suitable for metered emptying in confined spaces. The push-off wall allows bulk materials to be pushed out easily and without leaving any residue. In addition, a discharge height gain, for example at the mixing wagon, can be achieved by the discharge wall. The standard flow divider and pressure relief valve ensure that the bulk material is discharged evenly.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 132
Multi Purpose - 4 in 1
The SAPHIR folding shovel KS is an efficient multi-purpose shovel with a wide range of applications. The front part of the bucket can be opened using two hydraulic cylinders. This enables, for example, the transport of logs, dosed filling and emptying of the contents, the levelling of paths and the loading of soil or gravel, for example. All appliances are equipped with an adjustable pressure relief valve ex works.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 156
Multi Purpose - 4 in 1
The SAPHIR folding shovel KS L is an efficient multi-purpose shovel with a wide range of applications. The front part of the bucket can be opened using two hydraulic cylinders. This enables, for example, the transport of logs, the metered filling and emptying of bulk materials, the levelling of paths and the loading of soil or gravel, for example. The standard mounting via the SAPHIR Variable Lock System (VLS) and the screwable recess for the Z-kinematics mean that the KS L can be customised for every type of carrier vehicle. All appliances are equipped with an adjustable pressure relief valve ex works.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 158
Bulk weights up to 1,300 kg.
The SAPHIR SKS side tipping bucket is a specialised working tool and is mainly used in road construction and civil engineering. To backfill the side of the road, for example, the bucket body can be tilted sideways to the right in the direction of travel. This means that the carrier vehicle has to manoeuvre less and is positioned at a 90° angle to the unloading point. The bucket is suitable for bulk weights up to max. 1,300 kg/m³.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 160
Safely pick up the relevant crops.
The SAPHIR potato baskets KK and the SAPHIR beet baskets RK enable you to safely pick up the relevant crops. Edge protection prevents damage to the fruit, while the bottom of the basket allows sand and stones to be sieved out.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 164
Safely pick up the relevant crops.
The SAPHIR potato baskets KK and the SAPHIR beet baskets RK enable you to safely pick up the relevant crops. Edge protection prevents damage to the fruit, while the bottom of the basket allows sand and stones to be sieved out.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 164
Safely pick up the relevant crops.
The SAPHIR potato baskets KK and the SAPHIR beet baskets RK enable you to safely pick up the relevant crops. Edge protection prevents damage to the fruit, while the bottom of the basket allows sand and stones to be sieved out.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 164
Safely pick up the relevant crops.
The SAPHIR potato baskets KK and the SAPHIR beet baskets RK enable you to safely pick up the relevant crops. Edge protection prevents damage to the fruit, while the bottom of the basket allows sand and stones to be sieved out.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 164
Enables stones to be loaded or picked up.
The SAPHIR stone basket STK enables stones to be loaded or picked up. The particularly robust construction of the basket and the material thickness enable universal use. Due to the round steel construction, sand and small stones can fall out, among other things. The stone basket is optionally available with a permanently welded roll-back protection on the round steel bars.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 168
Adapter - CAT II
A wide variety of adapters can be manufactured for tractors, farm, wheel and telescopic loaders. This optimises the front boom dimension and tilt angle. On the attachment side, the adapter frames are equipped with a mechanical locking mechanism. The adapter can also be equipped with an optional tool lock.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 242+
Adapter - CAT II & III adjustable
A wide variety of adapters can be manufactured for tractors, farm, wheel and telescopic loaders. This optimises the front boom dimension and tilt angle. On the attachment side, the adapter frames are equipped with a mechanical locking mechanism. The adapter can also be equipped with an optional tool lock.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 242+
Adapter - Euro socket
A wide variety of adapters can be manufactured for tractors, farm, wheel and telescopic loaders. This optimises the front boom dimension and tilt angle. On the attachment side, the adapter frames are equipped with a mechanical locking mechanism. The adapter can also be equipped with an optional tool lock.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 242+
Adapter - for farm and wheel loaders up to 2.5 T
A wide variety of adapters can be manufactured for tractors, farm, wheel and telescopic loaders. This optimises the front boom dimension and tilt angle. On the attachment side, the adapter frames are equipped with a mechanical locking mechanism. The adapter can also be equipped with an optional tool lock.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 242+
Adapter for farm and wheel loaders from 2.5 T
A wide variety of adapters can be manufactured for tractors, farm, wheel and telescopic loaders. This optimises the front boom dimension and tilt angle. On the attachment side, the adapter frames are equipped with a mechanical locking mechanism. The adapter can also be equipped with an optional tool lock.
For all Technical Details, Sizing and Accessory options – download the SAPHIR Product Catalogue > See Page 242+
